**********************************************************************************************************
|                                     Data statement                                   			 |
|                            //First published 02.02.2023//                            			 |
|                                     For the study:                                   			 |
|                                Karlsson et al., 2023                               			 |
| "The power of light: Impact on the performance of biocontrol agents under minimal nutrient conditions" |
**********************************************************************************************************

The publication depended on a dataset for the phenotypic microarray (PM 1 and PM 2) experiments for three bacteria under six light treatments, with six replicates for each. Each csv file is the raw data for one light treatment and all three bacteria. The output is in OmniLog values, which were measured as a colour change of tetrazolium blue due to respiration. Measurements for the dark treatment occurred every 15 min for 96 hours. For the other treatments manual measurements were taken every: 0, 6, 10, 24, 30, 48, 54, 72, and 96 h post inoculation (hpi).

(1) SLF_Darkness_allHours_kinetc.csv:
The full dataset, for the darkness treatment, for all three organisms.
Set up Time  	aug 16 2019 3:12 AM --> When the experiment started
Position     	 4-A --> Where in the machine the Plate was placed
Plate Type   	PM 1- --> Type of plate can either be PM 1 or PM 2
Strain Type  	---
Sample Number	Sgdark6 --> Sg refers to Streptomyces griseoviridis, dark is the treatment, 6 is the replicate number 
Strain Name  	
Strain Number	
Other        	

Sample numbers can vary by either starting with:
Sg --> Streptomyces griseoviridis
Ba --> Bacillus amyloliquefaciens
Pc --> Pseudomonas chlororaphis


(2) SLF_420_allHours_kinetic.csv
The full dataset, for the 420 nm treatment, for all three organisms. Plates were manually placed in the incubator and measured for 1 hour at a time. 


(3) SLF_450_allHours_kinetic.csv:
The full dataset, for the 450/460 nm treatment, for all three organisms. Plates were manually placed in the incubator and measured for 1 hour at a time. 

 
(4) SLF_530_allHours_kinetic.csv:
The full dataset, for the 530 nm treatment, for all three organisms. Plates were manually placed in the incubator and measured for 1 hour at a time. 

(5) SLF_620_allHours_kinetic.csv:
The full dataset, for the 620 nm treatment, for all three organisms. Plates were manually placed in the incubator and measured for 1 hour at a time. 

(6) SLF_660_allHours_kinetic.csv:
The full dataset, for the 660 nm treatment, for all three organisms. Plates were manually placed in the incubator and measured for 1 hour at a time. 
