README
======

Dataset title:
data for  [Changes in Secondary Organic Aerosol Composition and Volatility Going from a Low to a High HO2/RO2 Regime in α-Pinene Photooxidation 
]

Creators:
[Veronica Geretti and Mattias Hallquist]

Responsible organization:
[University of Gothenburg]

See the Researchdata.se catalogue entry for this dataset for complete metadata, including the dataset description, recommended citation, contact information, and information about how to obtain the dataset. 

Description: [Here are reported data from chamber experiments of Secondary Organic Aerosol (SOA) formation from α-pinene under more atmospherically relevant hydroperoxyl radicals (HO2) to peroxy radicals (RO2) ratio. Our result shows reduced SOA formation and increased volatility from low to high HO2/RO2 conditions. ]


Essential information for dataset reuse.
----------------------------------------

The experiments were run in steady-state conditions in the SAPHIR STAR stirred tank reactor. The particle-phase was characterized with a Filter Inlet for Gases and AEROsols coupled with an iodide Chemical Ionization Mass Spectrometer (FIGAERO-CIMS), and a CIMS with NO3- ionization was used for gas-phase measurements. 

The particle-phase data is normalized by reagent ion (iodide) and water. 
The blank filter from empty chamber was subtracted (see supplements for more info). 
The particle-phase data is in counts/m3 resulting from integration of the individual thermograms and normalization by sampled volume and sampling time. The 2 repeated desorption thermograms were averaged to one. 
The GUFIT (explained in the manuscript and supplemental material) was applied to the thermograms. The reported data consists of the EMG1 area of the thermograms. 
The Tmax values extracted are reported together with the calculated logC* values. 
The LogC* were calculated utilizing a combined approach based on Tmax and logC* parameterization from Peräkylä et al. (2020), see manuscript for more details.
The gas-phase consists of averaged counts per second and the standard deviation of the steady state sampling. 
The gas-phase data is normalized by the TIC of the NO3CIMS, and chamber and instrumental background is subtracted.

The data sheets consist of one value for compound. The compounds are reported with their chemical formula and their summed mass. Both gas and particle phase data are normalized by alpha-pinene turnover (see manuscript for details).


Dataset organization
--------------------

The data set is separated into particle and gas phase data. 
Data regarding the particle phase corresponds to the following files: lowHO2RO2_SS_EMG1_apinOH_particlephase, highHO2RO2_SS_EMG1_apinOH_particlephase, Tmax_logC_data. 
Data regarding the gas phase corresponds to the following files: gas_phase_apin_SS_NO3CIMS.


Datafile descriptions
----------------------

lowHO2RO2_SS_EMG1_apinOH_particlephase.csv - Particle phase data from low HO2/RO2 from FIGAERO I CIMS
Columns:
sumFormula - chemical formula including I-	
formula	- chemical formula excluding I-
counts/m3 - counts/m3 (unit)
mass - molecular mass

highHO2RO2_SS_EMG1_apinOH_particlephase.csv - Particle phase data from high HO2/RO2  from FIGAERO I CIMS
Columns:
sumFormula - chemical formula including I-	
formula	- chemical formula excluding I-
counts/m3 - counts/m3 (unit)
mass - molecular mass

Tmax_logC_data.csv - Tmax and logC* from particle phase data from low and high HO2/RO2 from FIGAERO I CIMS
columns:
formula	- chemical formula excluding I-
Cstar_from_Tmax_lowHO2	- logC* in low HO2/RO2
Cstar_from_Tmax_highHO2	- logC* in high HO2/RO2
Tmax_lowHO2  - Tmax in low HO2/RO2
Tmax1_highHO2  - Tmax in high HO2/RO2

gas_phase_apin_SS_NO3CIMS.csv - gas phase data from NO3 CIMS
formula	- chemical formula excluding NO3
lowHO2	- average gas phase counts in low HO2/RO2
lowHO2_stdev - standard deviation of gas phase measurement in low HO2/RO2
highHO2	- average gas phase counts in high HO2/RO2
highHO2_stdev - standard deviation of gas phase measurement in high HO2/RO2


Reference information
---------------------
Lopez-Hilfiker, F. D. et al. A novel method for online analysis of gas and particle composition: Description and evaluation of a filter inlet for gases and AEROsols (FIGAERO). Atmos Meas Tech 7, 983–1001 (2014).

Lee, B. H. et al. An iodide-adduct high-resolution time-of-flight chemical-ionization mass spectrometer: Application to atmospheric inorganic and organic compounds. Environ Sci Technol 48, 6309–6317 (2014).

Peräkylä, O. et al. Experimental investigation into the volatilities of highly oxygenated organic molecules (HOMs). Atmos Chem Phys 20, 649–669 (2020).

Rissanen, M. P., Mikkilä, J., Iyer, S. & Hakala, J. Multi-scheme chemical ionization inlet (MION) for fast switching of reagent ion chemistry in atmospheric pressure chemical ionization mass spectrometry (CIMS) applications. Atmos Meas Tech 12, 6635–6646 (2019).


Data Quality:
the GUFIT model that was used to extract Tmax and thus logC* is a newly developed, custom-built Python code.  Check supplemental information for more details. It produces uncertainties in the Tmax values thus in the logC calculations. Most of the Tmax extracted are in line with previously reported values found in literature.

